Get Top 5 Best Saw Blade For Cutting Luan

If you are looking for something to do the job properly, without damaging the surface, then I’d recommend you are in the right place. Here we discuss the best saw blade for cutting luan.

A good quality luan cutting saw blade has some features such as a fine-tooth count and a sharp blade that can handle your luan plywood easily and leave you with a smooth and clean cut. Luan plywood is a fairly easy material to cut, however, it is very important to use the best circular saw blade for plywood.

This means that you need to invest in a quality saw blade. You want a good blade that will last. You also don’t want to spend too much on it.

Best Saw Blade For Cutting Luan

Freud 10Freud 10″ x 30T Industrial Thin Kerf
  • 10″ Blade Diameter.
  • 30 Teeth, TCG Grind, 5/8″ Arbor.
  • TiCo HI-Density Carbide Ripping Blend.
  • Non-Stick Coating reduces blade drag.
Check Latest Price
Makita TCT Saw BladeMakita TCT Saw Blade
  • Ultra thin-kerf design.
  • Number of blade teeth 30.
  • Blade weight is 0.28 Pounds.
  • Specially designed for plywood cuts.
Check Latest Price
Carbide-Tipped Circular Saw BladeCarbide-Tipped Circular Saw Blade
  • 5-3/8″ Blade Diameter.
  • 7/8-5/8″ Arbor Diameter.
  • Max RPM up to 12250.
  • Number of blade teeth 30.
Check Latest Price
Toolman Circular Saw BladeToolman Circular Saw Blade
  • Blade diameter 5-3/8″.
  • Maximum speed up to 9000 RPM.
  • Blade made from Carbide Alloy.
  • Arbor size is 5/8 inch to 7/8 inch
Check Latest Price
MOTORHEAD Tungsten Carbide Tip Circular Saw BladeMOTORHEAD Tungsten Carbide Tip Circular Saw Blade
  • Blade diameter is 6-1/2 inches.
  • Blade arbor diameter 5/8”.
  • Tungsten carbide coating.
  • Ultra-Thin Kerf design.
Check Latest Price

What is a luan plywood?

The term ‘luan’ is derived from the Vietnamese name ‘Luo’. It’s similar to hardboard (MDF), which is commonly used for surfboards. It has good physical properties and is resistant to mold. It is light, but not as light as polystyrene.

This plywood is a sheet of wood that is glued together to create a solid board. Typically this plywood has been reinforced using special fibers and is highly resistant to fire and insects. It’s cheaper than oak plywood and is commonly used in all interior work.

Is lauan plywood strong?

Lauan plywood comes from the word plank which means it is made from layers of wood glued together. This plywood is extremely strong and can be used for any kind of construction project you can think of. It has many uses including making decks, building shelves, etc. In fact, most modern furniture is actually made out of plywood! It has a high resistance to rot, decay, and insects.

Freud 10″ x 30T Industrial Thin Kerf Blade

Best Saw Blade For Cutting Luan

If you’ve been to the lumberyard or Home Depot recently, you’ve noticed a dramatic increase in the price of the thin-kerf industrial blades. That’s because a significant percentage of the market has switched to the new, super-thin “Freud” blades.

This is the best saw blade for cutting luan. It has all the features I need to make a nice, clean-cut on all types of material. The anti-vibration slots are a big plus. Also, it has an excellent selection of blades for the size and cost of this tool. One thing I would change is the color of the box it came in. It’s kind of drab and gray and could use some brightening up. Nothing significant. It is easy to use and has all the features I need.

I am using it to create the cutting instructions for a new product I’m working on. It makes the process much smoother and less error-prone. I especially like how the table of contents is generated for you based on the sections in your document.

  • It saves time and material.
  • It gives a perfect finish.
  • The strongest thin kerf blade available.
  • It’s perfect for all your industrial applications.
  • It’s not a perfect fit for all applications.
  • Its price is too much from others.

Makita A-95037 Saw Blade

Best Saw Blade For Cutting Luan

If you are looking for the best miter saw blade for fine cuts, then this is a great option for you. It has a super-thin kerf which means that it will produce less waste material. This will allow you to get more material on the cutting surface veneer of your circular saw, miter saw, or another cutting tool.

This is a great saw for beginners. It has a wide beveled edge that makes it very easy to cut materials like Sheetrock and other drywall. It also has a nice, sharp, high-speed cutting action that keeps your work area clean. The only thing I would change is the name of the product. In my opinion, “TCT” is not a particularly catchy or informative name.

I would recommend this product for anyone who needs to make straight cuts in plywood, luan, or other solid wood materials. I have a feeling that more people are going to discover the joys of using this product than any other power tool I can think of. It is truly a remarkable product.

  • Helps prevent blade break-off.
  • Improves accuracy.
  • It has a super-duper micro-beveled edge.
  • It doesn’t gather dust.
  • The teeth get clogged easily.
  • This is not suitable for wet wood.

Carbide-Tipped Circular Saw Blade

Best Saw Blade For Cutting Luan

Looking for the best 10” miter saw blade for trim? This wood cutting blade has a carbide tip and is made of high-quality steel. It’s designed specifically for your table saw or circular saw. It has a.075″ kerf, making it thinner than ordinary steel circular blades, and allows you to get a clean, thin cut every time you use your table saw or circular saw.

I like this blade because it has a thin kerf which means less material is wasted during the cut. It has a very sharp edge and a long service life. The steel is hardened and the teeth are ground very fine which makes it very effective cuts on luan plywood. It comes in a package of 2 which is a lot for me since I don’t typically use a circular saw that often.

I think the blade solves the problem of having to buy new blades frequently. With this blade, you can use a single saw for a long time and not have to replace the blades as often. This saves money, time, and resources.

  • It penetrates material quickly.
  • It has an extra-long life.
  • It has an extremely sharp cutting edge.
  • It has a super-hard, almost diamond-like surface.
  • It is not recommended for use on exterior surfaces.
  • It is more difficult to sharpen.

Toolman 5-3/8″ 30T Circular Saw Blade

best blade for cutting luan

Toolman 5-3/8 30T circular saw blade is a great addition to your tool kit. It features a carbide alloy which makes it extremely durable. This saw blade also has a very high-speed rating which allows you to get the job done with less effort.

This blade is one of the best I’ve ever used. It’s sharp out of the box, stays that way for a long time, and has an incredible cutting ability. It is perfect for general cutting and for cutting those hard-to-reach places. And, it’s so good, I hardly ever need to sharpen it! The cutting ability is outstanding, it has excellent “bite”, and it just goes where I point it with no fussing around.

It is also a great value. It comes with a 100% iron-clad money-back guarantee. If you are not satisfied with this product for any reason, just return it for a full refund. You have nothing to lose. And this blade is 100% suitable for luan plywood thickness.

  • It supports maximum rpm speed.
  • It has a very thin edge.
  • It has a very sharp cutting surface veneer.
  • It is made by Toolmam.
  • It is not suitable for cutting hardwood.
  • It may produce a lot of vibration.

MOTORHEAD Tungsten Circular Saw Blade

staining luan plywood

Do you own a circular saw? If so, you need to get the best blade for cutting luan! This saw blade is optimized for all those power tools with a 5/8” arbor like a circular saw, table saw, jigsaw, and so on. It has a tungsten carbide coating that provides extra protection and keeps the edge sharp longer. The ultra-thin kerf design helps reduce drag and increase efficiency.

What do you like best?

The saw has a nice sharp edge and it is easy to push the trigger to make quick work of cutting through a few 2x4s. The blade glides smoothly and easily through the wood without much effort. It is very easy to change the blade depth when needed. The only negative I can think of is the instructions are not included.

What do you dislike?

I don’t like that it only comes in one size. The packaging says it fits all 6-1/2″ circular saws but it doesn’t say anything about the arbor size. So, I bought another brand new one and checked the arbor size on that one and it is actually 5-3/8″ which is slightly smaller. This means the blade is a hair thicker than the one I got (actually, it’s a hair thinner) and it works great. So, if you have a corded or cordless circular saw with a 5/8″ arbor, this will fit and work great for you.

  • This blade is only for circular saws.
  • It comes with nice color coated.
  • It is applicable to all materials.
  • you may get lifetime US-based support.
  • It is not as sharp as a diamond blade.
  • Its price is a little high.


Luan plywood is not as hard as MDF or even Formica. It is actually much harder than both. Harder than oak, and almost as hard as granite. When a carpenter uses a hatchet to cut through a board of luan plywood, it takes longer and more effort if you do not use the best saw blade for cutting luan.

And we say Freud 10″ x 30T Industrial Thin Kerf Blade is the perfect choice for you. It’s made of high-carbon steel and has a 10″ x 30″ cutting capacity and a 1/2″ thick hardwood handle. It has a razor-sharp, 10°, 10-1/2″ industrial kerf blade, and a hardened steel blade protector.

How do you cut Luan without splintering?

You use a diamond saw. It’s very sharp and very slow. Only experienced carpenters should attempt to cut luan with a regular hacksaw.

How do you cut thin Luan?

  • The “Luan” in “thin Luan” is a reference to the hard rubber used in the making of the plywood. It gives the board a slight grain or luster.
  • When cutting thin “Luan”, a bandsaw (or circular saw) can be used.
  • A circular saw will give a straighter cut. If you don’t have a bandsaw or circular saw, you can use an angle grinder with a straight edge cutting wheel.

What is the best saw blade to cut plywood?

The answer is different for different people… but, for me, the answer is a circular saw blade. Yes, it is true that there are some circular saws made for cutting plywood. And Freud 10″ x 30T Industrial diamond blade is the best blade to cut plywood because it is the sharpest blade, if you can get your hands on it, it will give you the most cutting power, but it will also cut faster and smoother than any other kind of blade.

What is the best tool to cut Luan?

A handsaw will work just fine… if you have the patience to learn how to use it! Look in your local hardware store for a hacksaw blade designed for cutting luan. A metal file will work just fine. if you have the patience to learn how to use it!

What is the purpose of Luan plywood?

  • The main purpose of Luan is to make construction and repair jobs easier for contractors and homeowners. It also provides a “textured” surface that hides scratches and other defects.
  • The texture makes it possible to paint or stain the surface without having to sand the whole piece.
  • For many people, “plywood” conjures up images of cheap, mass-produced furniture.
  • Plywood is often used in furniture made for temporary or “transitional” furnishings.
  • Plywood is usually cheaper than solid woods and can be very economical if you only need a small amount of furniture.

Leave a Comment

Your email address will not be published.

Scroll to Top