Best 7 1/4 Circular Saw Blade For Plywood

The market has hundreds of the best circular saw blade for plywood, and each one has its own pros and cons. Some will be better at cutting soft pine and oak than hard maple or cherry.

Others are designed to cut more smoothly than others. If you are going to buy the best saw blade for plywood, you want to make sure that you get a blade that fits your intended application.

In this article, we will share with you the top 7 best 7 1/4 circular saw blade for plywood that you can choose.

Best 7 1/4 Circular Saw Blade For Plywood

Freud Diablo 7-1/4 Blade Freud Diablo 7-1/4 Blade
  • The number of teeth is 60.
  • Weight is only 0.3 Pounds.
  • Maximum Cutting Dia 7.25 In.
Check Latest Price
Diablo D0760A Ultra Thin Blade Diablo D0760A Ultra Thin Blade
  • Multi Color.
  • ‎Weight 4.8 ounces.
  • Cutting Diameter ‎7.25.
Check Latest Price
Luckyway 7-1/4 In Saw Blade Luckyway 7-1/4 In Saw Blade
  • The number of Teeth is 60.
  • Suitable for wood.
  • Tungsten carbide teeth.
Check Latest Price
OA-BRES Combo 7-1/4 OA-BRES Combo 7-1/4 ” Blades
  • 40T Ripping Blade.
  • Nice Storage Case.
  • Fully Polished.
Check Latest Price
DEWALT DWA171460 7-1/4 DEWALT DWA171460 7-1/4″ Blade
  • Tungsten Carbide Blade.
  • Thin Kerf Design.
  • Weight Only 0.56 lbs
Check Latest Price
DEWALT DWA171424 Saw Blade DEWALT DWA171424 Saw Blade
  • Anti Stick Coating.
  • Reinforced Shoulder.
  • Number of Teeth 24.
Check Latest Price
COMOWARE Circular Blades COMOWARE Circular Blades
  • Number of Teeth 40.
  • 5/8″ Diamond Arbor.
  • Carbon Steel.
Check Latest Price

what is the best circular saw blade for plywood

  1. Freud D0740A Diablo 7 1/4 Saw Blade.
  2. Freud Diablo 7-1/4 Finishing Circular Saw Blade.
  3. Luckyway 7-1/4 Circular Saw Blade.
  4. OA-BRES 7-1/4 TCT Circular Saw Blade.
  5. DEWALT 7-1/4-Inch Circular Saw Blade.
  6. DEWALT DWA171424 7-1/4 Circular Saw Blade.
  7. COMOWARE Circular Saw Blades 7 1/4 inch.

What size and type of blade do I need for plywood?

The size and type of blade you need will depend on the type of saw you are using. There is no standard blade size for plywood. It is generally the width and thickness of the material, plus the number of layers.

To find the size you need for plywood, look at the material’s width and thickness. But the best circular saw blade for plywood will cut cleanly through the plywood. So, a 165mm circular saw blade for plywood is typically needed for plywood.

Can you cut plywood with a circular saw?

Yes, a circular saw can be used to cut plywood. However, the saw blade needs to be at least the best 7 1/4 circular saw blade for plywood in order to cut cleanly through all kinds of plywood. I was use the best 5 1/2 circular saw blade for plywood, but it takes more time and effort than using a table saw.

I’ve used a circular saw before on plywood, but I don’t think it’s necessary. Plywood can be cut with a circular saw, but a jigsaw and table are probably faster.

Most Commonly Used Saw Blades for Cutting Plywood

While it may appear that saw blades are pretty much alike, in reality, they vary in many aspects. For one, there are many combinations of blade types to choose from.

Secondly, for woodworkers who cut plywood, a combination of a rip and a combination blade is perfect. Thirdly, both rip and combination blades are perfect for plywood cutting.

However, if you are still unsure which one to choose between the two, let me elaborate on these two types of blades.

Blade Application That Suitable For Cutting Plywood

Rip Blades

Rip blades are great for use when ripping tough materials like plywood. They have a low tooth count, an extreme hook angle, and extra gullet depth. These characteristics help to make the cut even the most challenging boards.

Combination Blades

One of the most important aspects of cutting steel with a hacksaw is the blade. A good combination blade is built for combining the features of rip and crosscut blades. It makes it easier to change from ripping to crosscutting.

Blade Sizes for Cutting Plywood

Most people use the best circular saw blade for particle board that has a diameter of 7-1/4″. You can also find blades with a smaller diameter ranging from 5-3/8″ and 6-1/2. Larger diameter blades let you make fewer passes, but they also require more passes. With smaller diameter blades, you need to compensate by making multiple passes through the board. This increases the risk of splitting or damaging the board.

Optimal TPI on Plywood

You should go for a 40-tooth blade to create smoother cuts. Plywood comes in various sheet sizes. So, if you are ripping through plywood, you need a 40-tooth blade or less.

For woodwork projects such as cabinets or furniture, it is recommended that you use saws with 80 or even 96 teeth. This will ensure that the cut is free of splinters.

Freud D0740A Diablo 7 1/4 Saw Blade

Best 7 1/4 Circular Saw Blade For Plywood

The Freud Diablo is the best 7 1 4 circular saw blade for plywood who likes to work with their hands. This diablo plywood blade is made from high-quality stainless steel that has a sharp edge and a sturdy blade for great performance.

This diablo 7-1/4 x40t finish/plywood blade is built to last, and the saw is compatible with most electric and pneumatic power tools. It’s also safe for both hand and power tools, so you can use it around the house and garden.

I use this diablo 7 14 40 tooth because I have small hands, and the blades that came with the saw were too big for me. I decided to get the Diablo 7-1/4 Saw Blade, and it worked great. It is very easy to sharpen, and the cutting capacity is also good.

The only thing that I dislike is that it is very hard to change the blade. When I bought a diablo 7 14 x40t finish plywood blade, the blade was not in the package. The blade is not cheap, but it is a good choice.

  • It has 40 teeth.
  • Its weight is only 0.181 Kilograms.
  • The size of the kerf is .059″.
  • It makes from Carbide steel.
  • Warranty limited lifetime.
  • It is not suitable for metal cuts.

Freud Diablo 7-1/4 Finishing Circular Saw Blade

Best 7 1/4 Circular Saw Blade For Plywood

Looking for the best 7 1 4 circular saw blade for plywood? This Diablo 7-1/4 Finishing Circular Saw Blade has TiCo Hi-Density carbide specifically designed for each application to increase performance. They also feature a super-thin laser cut kerf for fast, durable, and clean cuts.

And 7 1/4 60 tooth saw blade comes with a non-stick coating that protects against heat, gumming and corrosion. The Tri-metal brazing allows carbide tips to withstand extreme impact for maximum durability.

The 7 14 60 tooth saw blade is extremely sharp and will cut through the wood. It was recommended for cutting larger pieces of lumber. I have used it in the past on smaller pieces of wood and it works great. The blade is strong and lasts for a long time.

It takes a long time to sharpen and the tool can get a bit heavy. It is very difficult to remove the blade from the saw and put it back in. The blade tends to get stuck in the saw and there are times that it does not work well when it comes out. Overall, it is a great saw that will last for a long time.

  • It has good performance in wet conditions.
  • It’s made from steel.
  • It’s sturdy and strong.
  • It’s easy to use and clean.
  • It has no warranty.
  • The price is a little high.

Luckyway 7-1/4 Circular Saw Blade

Best 7 1/4 Circular Saw Blade For Plywood

Do you love to do DIY projects and want the best tools for the job? We have just what you need! Luckyway 7-1/4 Circular Saw Blade will help you tackle your next project. This luckyway circular saw blade is a perfect size and it’s made with the best material,

So you can be confident that it will give you years of service. It has a fully hardened steel blade body, and it’s tough enough to cut through hardwood and softwood without breaking.

The blade was easy to install, and the saw is very easy to use. I would recommend this blade to anyone who needs a circular saw blade for cross-cutting plywood and softwoods. It has been working great for me.

I didn’t really find anything to dislike about the luckyway circular saw blade replacement. It is very nice. And it comes with a high-quality, long-lasting saw blade, so you won’t have to replace it often. The tungsten carbide teeth are great for cutting plywood. I would recommend this blade to anyone looking for a circular saw.

  • You get 2 blades on the pack.
  • Every blade has 60 teeth.
  • Specially designed for plywood cutting.
  • You may get different sizes of blades.
  • The blade is made with a steel body.
  • It is not suitable for metal cuts.

OA-BRES Combo 7-1/4 ” Circular Saw Blades

Best 7 1/4 Circular Saw Blade For Plywood

The best 7 1 4 circular saw blade for plywood is an essential tool for most woodworkers. This OA-BRES 7-1/4 TCT Circular Saw Blade is the perfect choice for you. Made from durable premium alloy steel material,

it has hardened and sharper construction-grade tungsten carbide teeth for effective woodworking. It also incorporates an ATB (Alternating Top Bevel) offset tooth design, sharp saw blade cutters with thin kerf to ensure smooth, fast, and accurate cutting with impressive results.

There are so many benefits to using this blade. It is easy to use, and the teeth are very sharp. I have never used a blade that was so sharp, yet it cuts well. The teeth are also made of a high-quality material that holds its edge very well. 

This blade has a nice finish on it. It is not as shiny as other blades that I have used in the past. This is not a problem for me. I just like the way it looks.

  • You may get 3 blades on every pack.
  • All are blade has not same teeth.
  • Specially designed for softwood.
  • You may use it on your miter saw and table saw.
  • It is not for wet wood cutting.
  • The blade case is not durable.

DEWALT 7-1/4-Inch Circular Saw Blade

Best 7 1/4 Circular Saw Blade

You’re ready to start your DIY project, but you need a circular saw blade. And you need it fast. The DEWALT DWA171460 7-1/4-Inch Circular Saw Blade is made from high-density tungsten carbide for toughness, wear-resistance, and long life. It’s also anti-stick coated to reduce friction and gumming. Thin kerf design for smooth cuts.

Reinforced shoulder for impact resistance in nail-embedded wood. And it’s optimized for use on both corded and cordless circular saws. So whether you’re using a corded or cordless, this circular saw blade will help make your DIY project a breeze!

The best feature of this blade is its durability. I was able to cut through two pieces of plywood without any issues. The next best feature is its thin kerf design. This makes it easy to cut through wood that has been stained or painted.

I didn’t really find anything bad about this blade. It’s a little pricey, but it’s a good quality blade that will last for a long time.

  • It is made from high-density tungsten Carbide.
  • Its kerf design is very thin.
  • It has 60 teeth.
  • It gives a smooth precise cut.
  • It is not suitable for 3/4″ thin plywood.
  • You should cut slowly.

DEWALT DWA171424 7-1/4 Circular Saw Blade

Best 7 1/4 Circular Saw Blade

Looking for the best circular saw blade for plywood cutting? This saw blade is made from high-density tungsten carbide for toughness, wear resistance, and long life. And it has a tough coat anti-stick coating that reduces friction and gumming.

It also has a thin kerf design that’s ideal for smooth cuts. Finally, it’s reinforced with the shoulder to protect against impact when embedding nails in wood.

I like this best circular saw blade for ripping hardwood because it is a circular saw blade that is more durable than other brands of blades. It has a unique design that makes it more efficient than other brands and lasts longer than other brands.

This best circular saw blade for plywood cutting is a good choice for anyone who likes to work on projects around their house. It is very easy to use. It is more expensive than other brands of blades. It is a bit heavy for me to carry around. It is more difficult to sharpen than other brands of blades.

  • It has a tough anti-stick coating.
  • Thin kerf design for smooth cuts.
  • It has 24 teeth.
  • It is specially designed for the cordless circular saw.
  • It is not perfect for metal cuts.
  • It may produce much dust.

COMOWARE Circular Saw Blades 7 1/4 inch

Best 7 1/4 Circular Saw Blade

The Circular Saw Blade 7 1/4″ is the best replacement part for your Circular Saw. Because the 7-1/4″ saw blade has a 5/8″ diamond arbor which fits into both round and diamond hole blade machines and maintains stability when in use.

The ATB style adds cutting speed and durability. This helps maximize both the accuracy of the cut and the efficiency of your work, so you can enjoy a job well done and the ability to complete more tasks in less time.

I love the design and the quality of the blades. They are very sharp and durable, and they don’t lose their edge for years. I also like the size of the blade and the fact that it is made of carbide. It’s very sharp and cuts through anything.

The only downside to this blade is that it doesn’t come with any sort of guard or blade protection system, which is something you should definitely have if you’re using a circular saw. But, that’s an easy fix. Overall, I’m really pleased with my purchase.

  • It is made from Carbon Steel.
  • Its arbor size is 5/8″.
  • It is the sharpest blade.
  • It has an excellent ATB Style.
  • It didn’t rip as smooth as another blade.
  • It makes noise.

Final Words

Are you tired of looking for the right circular saw blade? Here are the 7 best 7 1/4 circular saw blade for plywood. I’ve tried every type of circular saw blade on the market,

And I have 7 favorite choices that I use almost exclusively. These circular saw blades work well for cutting plywood and cutting hardwood up to 3 inches thick.

So don’t worry about buying a new blade. Just keep using the one you have. You’ll never know until you try.

How To Prevent Splintering When Cutting Plywood

The different methods for cutting plywood with a circular saw are numerous. A few of them may cause you to lose some of your plywood, but a few others will allow you to cut it without splintering. Splintering happens when the spinning blade at high speed enters the sheet of plywood at the bottom and ends up at the top.

Splintering is usually only a problem when you are working on the top side of a sheet with some type of material. It’s less of a problem for sheets that are not wood, such as concrete or steel.

The best way to prevent splintering is by using good hardwood for the plywood. If the plywood is supported with four pieces of 2 x 4, the splintering should only occur on the flipside and will not be visible.

The best way to score wooden planks is by scoring the cut line before letting the circular saw cut across the wood. Doing so will ensure that the fibers break nicely when they are cut, which will make the circular saw cut more neatly through the wood.

How To Rip Plywood Using a Circular Saw?

The most challenging cut you can make on plywood is the rip cut because it runs across the entire length of the board. These cuts are exhausting and time-consuming, and you should take extra care when doing them.

The best way to achieve such smooth cuts is to make a series of non-stop cuts. This will help you create a better cut. A saw with a corded extension may be a good tool to use.

You may need to stand on the cutting sheet to accomplish a non-stop cut in some instances. Be very careful of kickback and make sure to place the cord on the floor if you are not using a cordless circular saw.

How many teeth is best for cutting plywood?

The number of teeth you need will depend on the thickness of the plywood and the blade type (i.e., angle or straight). To figure out how many teeth your saw has, simply look at the blade. The number of blade teeth varies from model to model. Some people prefer more teeth to give better control, but also make it harder to cut a smooth edge.

In cross-cutting wood or sawing plywood, use a 40-tooth to the 80-tooth blade. You can use a 40-tooth to 50-tooth general purpose blade as well. For joinery work, use a 40-tooth to 50-tooth all-purpose combination blade. For cutting MDF and other man-made materials, use a 50-tooth to the 80-tooth blade.

How thick of wood can a 7 1/4 circular saw cut?

The best circular saw blade for birch plywood is usually made with steel teeth that bite into the wood, not to mention the thickness of the blade. Circular saw blades are typically very thin so that they can be easily pulled through sheet metal and other materials.

It can cut any thickness of wood if it is powered properly. The best 7 1/4 circular saw blade for plywood of thickness of 2 inches and above. The blades are available with various teeth.

Can a framing blade cut plywood?

Yes, it can be cut through. You would have to use a thinner piece of wood as a spacer between the pieces. But if the cut is too deep, you have to be very careful. 

How do you cut plywood without it splintering?

Most people would say that if you use a proper technique with the tools you have, it will work well. There are a few tricks to cutting plywood that will make it less likely to splinter.

  • Use a saw blade made of high-quality steel, not cheap plywood.
  • Cut slowly, allowing plenty of time to work out any kinks in the wood.
  • Make sure the wood is dry, or use a waterproof adhesive to adhere the plywood to the wall.
  • Apply enough adhesive to completely cover the surface of the plywood.

Is a circular saw good for cutting plywood? 

A circular saw is usually a better option than a table saw or jigsaw when cutting plywood. Circular saws are cheaper than other types of power tools.

The cut quality of circular saws can be very good, but they often require maintenance and are more difficult to sharpen than table saws.

If you use the best 6 1/2 circular saw blade for plywood, then the circular saw can be an incredibly powerful tool for most DIY projects.

How do you cut plywood with a circular saw?

A circular saw is made for cutting wood. It’s not intended to cut plywood, but if the best circular saw blade for baseboard is dull, you can damage the wood.

Most of us use a circular saw for cutting lumber and other kinds of wood, not plywood. If we’re making a piece of plywood, we typically need to cut it with a jigsaw or band saw. Here we give some tips to cut plywood with a circular. 

  • First of all pick the best 7 1/4 circular saw blade for plywood cutting.
  • Set the blade depth (the distance between the blade and the top of the blade).
  • Adjust the blade angle to be as close to perpendicular to the workpiece as possible.
  • Hold the circular saw steady by placing one hand on the workpiece and one hand on the fence or baseboard so that you can use your other hand to guide the blade.
  • Lift the saw up and down to push the blade forward and back.
  • When cutting plywood, hold the piece at a slight upward angle with the blade at the lowest setting to prevent splintering.
  • If you are not sure what settings you should use for plywood, try using the highest setting first, then gradually lower the settings until you have reached your desired cut depth.

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *